Ruijie-Reyee RG-EST100-E 2.4GHz Dual-stream 500m Outdoor Wireless Bridge

The Ruijie-Reyee RG-EST100-E is a dual-stream wireless bridge for surveillance video backhaul or remote wireless transmission in scenarios such as elevators, tower cranes, factories, campuses, and construction sites. Compliant with the IEEE 802.11n standard, the wireless bridge operates at 2.4 GHz supporting two spatial streams (2x2 MIMO technology) and provides a maximum data rate of 300Mbps which can fully meet the data link bandwidth requirements of various services. The RG-EST100-E consists of 2 devices, including the recorder-end and camera-end device. They are paired by default and can be deployed without  requiring any configurations. When used for video surveillance backhaul, it is recommended to connect a switch or hard disk recorder to the recorder-end and connect a network camera to the camera-end. RG-EST100-E can be managed via the app, including viewing the network topology and modifying configurations, which has completely revolutionized the conventional contact-type bridge configuration method. Bridge maintenance no longer requires working at heights, reducing the difficulty of maintaining bridges to an unprecedented level. With the four-sided curved edges design, RG-EST100-E fully utilizes the compact size and offers an exquisite exterior design.The casing of the device is optimized to deliver better dustproof and waterproof performance providing IP55 protection.

Specifications:

• Radio Design: 2 GHz Single-Band Dual-Stream
• Transmission Protocol: IEEE 802.11b/g/n
• Operating Band: 802.11b/g/n: 2.400～2.483GHz
• Antenna: Directional antennas, 8 dBi
• Polarization: Horizontal: 70°, Vertical: 70°
• Bridging Distance: 500m (recommended)
• Spatial Streams: 2x2, MU-MIMO
• Memory/Flash: 64 MB/8 MB
• Maximum Throughput: Up to 300 Mbps at 2.4 GHz
• Ports: 2 10/100Base-T Ethernet ports, port 1 with Passive PoE
• Max. Transmit Power: ≤100 mW(20 dBm) (adjustable)
• IP Rating: IP55
• Lightning Protection: ±6 KV(Common Mode)
• Installation: Wall-mounted/ Pole-mounted
• 3 Year Warranty

Software Features:

• Layer 2 Features: 
  - Ethernet: LAN Port Working in Bridging Mode
  - VLAN: 802.1Q VLAN
• L3 Features: 
  - IPv4: ARP, Ping, Traceroute
• UCAST: Default Route
• Internet: DHCP Client, Static IP Address
• WAN Address Collision Avoidance: Changing LAN Address Automatically upon WAN Address Collision
• Device Access:
  - 10.44.77.254
  - 192.168.120.1
  - 10.44.77.254
• Routing: Default Route

Management Features:

• SN Management: Entering SN, Importing SN by Excel File
• Wizard: Project Settings: Project Name, Password and Type
• MQLink

Networking Management:

• Adding Device to Network Based on LNID
• Set Up New Device (LNID=0)
• One-to-Many
• Removing the device from project when the device is reset to factory settings
• Restoring LNID to 0 and password to admin when the device is removed from project
• Network Migration
• Device Deletion
• Discovering neighboring devices automatically and reporting the device whose LNID is 0 or inconsistent with the network LNID
• Migrating the device automatically after users enter the password

Basic Settings: 

• AP/CPE Switchover
• LAN Settings
• Hostname Settings
• Password Settings
• Country/Region Code Settings
• Time Zone Settings
• Clock Settings

Network Settings:

• Password Settings
• IP Address Settings
• SSID Settings

Configuration Synchronization:

• Synchronizing configuration when the device is added
• After users edit settings on Eweb, MACC will receive the timestamp reported by the device and trigger synchronization
• A device goes online after settings are changed. The device will be synchronized with configuration based on its timestamp
• Synchronizing configuration among Ruijie Cloud, Eweb and MACC

Alarm:

• Default Configuration Notification
• IP Conflict
• Networkwide Management SSID Notification
• WDS Link Exception Alarm
• Disconnection Alarm

Diagnostics:

• Network Tools
• Fault Collection

System Tools:

• Upgrade: 
  - Upgrade to Specified Version
  - Upgrade All Devices
  - Local Upgrade
• Maintenance:
  - System Time
  - Reboot
  - Reset to Factory Settings
  - Web Session Timeout
  - Deployment Tool
• Device List: Hostname, Type, Client Count, Channel, Online/Offline Status
• Device Details: Hostname, SN, MAC Address, Management IP Address, Type, Firmware Version
• Remote SSH
• Remote Web

WDS Settings:

• One-click optimization
• Switching among multiple working modes (high-bandwidth/normal/anti-interference)
• WDS: SSID Hiding, Not Open
• AP/CPE Switchover
• SSID, Channel and Power Settings
• Bridging Status LED
• LED off: No bridging
• One LED blinking: < -78dBm
• One LED on: -78dBm< RSSI <-72dBm
• Two LEDs on: -72dBm< RSSI <-65dBm
• Three LEDs on: RSSI > -65dBm
• Root AP RSSI: The lowest RSSI shall prevail.
• Link Quality: High, Medium and Low
• If the CPE end detects bridging failure and fails to connect again in 5 minutes, it will
• be rebooted automatically to set up bridging again.
• Unlocked: Default SSID (Broadcast, Open), @ruijie-bXXXX
• Locked: Default SSID (Hidden, Open), @ruijie-bXXXX
• The locked device supports re-pairing on Eweb and can be locked again.
• AP/CPE supports fetching AP SSID/BSSID list by scanning.
• Display Recommended Camera Count
• Multi-VLAN Transparent Transmission

Security Features:

• Login Authentication (password, none)
• Static Password with Encrypted Transmission and Storage
• Developer Mode

Application Protocol Features:

• DNS client
• SSH, TFTP Client, DHCP-Server, DHCP Client, CLIENT

WLAN Basic Features:

• Local Forwarding
• Local Association

WLAN RF Features:

• 802.11 Protocol: Country Code Channel Expansion

WLAN Encryption and Security:

• Link Authentication
• Access Authentication
• Security (WPA-PSK/WPA2-PSK/WPA-WPA2-PSK)
• Key Agreement Protocol

Bridging Security:

• Bridging key for the entire network
• Bridging key for a pair of wireless bridges
• Bridging key for a wireless bridges
• WLAN QoS/WMM: WMM
• Storm Control: Multicast/Broadcast Conversion to Unicast (Four-Address)
• Multicast/Broadcast Rate Increase: Three-Address Broadcast/Multicast Packet Rate: 11 Mbps
• Multicast/Broadcast Packet Suppression:
  - Limiting the Rate of DHCP and ARP Broadcast Packets
  - Limiting the Rate of SSDP and mDNS Multicast Packets
  - Limiting the Rate of All Types of Broadcast Packets
  - Limiting the Rate of All Types of Multicast Packets

Monitoring:

• WDS Link Quality: Displaying WDS Link Quality
• Real Topology: Displaying Real Topology

Self-Organizing Network: 

• Establishing a Self-Organizing Network Between Bridges

Physical Features:

• LED indicators:
  - LEDs indicate the bridging quality:
  - LED off: No bridging
  - LED blinking: ≤-78dBm
  - One LED on: -78dBm< RSSI ≤-72dBm
  - Two LEDs on: -72dBm< RSSI ≤-65dBm
  - Three LEDs on: >-65dBm
• 1 reset button
• Power Supply: 12 VDC power supply or 12 VDC Passive PoE
• Power Consumption: < 5W
• MTBF: > 400,000H

Environmental:

• Operating temperature: -30°C to 60°C
• Storage temperature: -40°C to 70°C
• Operating humidity: 5% to 95% (non condensing)
• Storage humidity: 5% to 95% (non condensing)
• RSSI: -58 dBm/100 meters, -68 dBm/500 meters
• 3M: 14/100 meters, 5/500 meters
• 4-5M: 6/100 meters, 3/500 meters
• 6-7M: 3/100 meters, 1/500 meters

Dimensions:

• Unit Dimensions (DxWxH): 165.5 × 68.7 × 42mm
• Unit Weight: 0.3kg
• Package Dimensions (Wx DxH): 220 x 202 x 87mm
• Package Weight: 0.852kg

Package Contents:

• RG-EST100-E Wireless Bridge (Network Video Recorder End)
• RG-EST100-E(Camera End)
• 2x 12 VDC/1 A Power Adapter
• 2x Passive PoE Adapter
• 4x Hole Clamp
• 2x Mounting Template
• 1x User Manual
• 1x Warranty Card