Akubela Smart Gas Sensor (ZigBee) - MIR-GA100

Akubela Smart Gas Sensor is a wireless gas detector that adopts super low power consumption ZigBee wireless networking technology. It is used for detecting natural gas leakage and preventing harm caused by gas leakage. It adopts high stability semiconductor gas sensor, with high stability, little sensitivity drift and may other features. The sensor alarms while gas density in air exceeds alarm level. It is applicable for kitchen or possible gas leakage in door areas. It features advanced low-current gas-sensitive components for stable performance and easy installation. It swiftly detects even trace amounts of combustible gas in the air, emitting a loud 72-decibel audible and visual alarm. The alarm is transmitted via ZigBee to the mobile app, allowing users to take timely action. This sensor is ideal for residential homes, hotels, apartments where the risk of combustible gas leaks exists.

Highlights:

• Accurate monitoring of combustible gases
• Resistant to smoke and grease
• ZigBee signal relay capability
• Sleek, modern design
• Local audible and visual alarms with notifications push

Specifications:

• Model: MIR-GA100
• Host Material: Fireproof PC + Fireproof ABS
• Communication Protocol: ZigBee 3.0
• Detectable Gas: Natural Gas
• Alarm Concentration: 8% LEL (Lower
• Explosive Limit for natural gas)
• Alarm Concentration Accuracy: ±3% LEL
• Alarm Sound Pressure: ≥70 dB (at 1 meter directly in front)
• Input Voltage: 12V/DC (with external AC110V-220V adapter)
• Standby Current: <100mA (DC12V)
• Alarm Current: <150mA (DC12V)
• Operating Temperature: -10℃ to +55℃
• Operating Humidity: ≤95% RH (non-condensing)
• Unit Dimensions: Φ85 × 30mm
• Unit Weight: kg
• Package Dimensions (LxWxH): 86 x 86 x 73mm
• Package Weight: 0.15 kg

Networking method:

1. Connect the power adapter to the device to power it on. The device enters a warm-up state, with the yellow light flashing for 1 to 3 minutes.
2. Press and hold the reset button for about 5 seconds until the indicator light flashes rapidly, indicating it has entered network pairing mode.
3. Add the device to the network via the gateway.

 PartnerNET Akubela Smart Gas Sensor (ZigBee) Datasheet